The toilet is one of the most frequently used plumbing fixtures in the house. In many residences there is more than one toilet. Being so very much in demand, it is also liable to cause plumbing problems which require immediate attention. Offering you the most professional plumbing services, your expert New York plumber can help you out with any toilet related problem, and offer you useful tips which might assist you in tackling some of these problems yourself.
How Does Your Toilet Works
It may first be helpful for you to know your toilet operates, and what parts make up this device.
When you push the toilet handle, a chain is pulled which in turn releases the flush valve in the tank. The valve floats away, revealing a small drain hole through which approximately 2 gallons of flow rapidly, dropping into the bowl. When the tank is emptied, the flush valve once more assumes its position at the bottom of the tank.
The rapid flow and vast quantities of water activate the siphon in the bowl, which in fact sucks both the water and the waste matter down the drain.
The fall of the water level in the tank is accompanied by the fall of the filler float. As it drops, it turns on the refill valve. The water which flows through the refill valve fill up the tank and the bowl.
Once the tank is refilled the float rises again, and as it gets to the required level, the refill valve is turned off. In case the refill valve keeps working, the overflow tube, which is also located inside the tank, prevents flooding.
The simultaneous operation of these various devices allows your toilet to function smoothly and properly.
Typical Toilet Related Problems
Still, some things may go wrong… Clogged toilet, leaking toilet and overflowing toilet are but some typical examples of toilet malfunctions. You can contact your NYC plumberto help you out with any of these problems, either by coming over to your house or by giving you helpful do-it-yourself toilet repair instructions.
Toilet Replacement & Installation
Replacing old toilets and installing new ones are also projects you can easily tackle, by simply following a few basic steps:
- Disconnect the water supply by turning off the shutoff valve next to the toilet.
- Pull out the water line from the tank.
Attach a new line to the new tank.
- Empty both the old tank and the old bowl before you remove them.
- Using a wrench, take out all existing nuts and bolts and fasten new ones to the relevant toilet parts.
Contact your New York plumber for additional toilet repair tips and guidance.
Choose a local recommended plumber in New York city:
- Manhattan Plumber
- Brooklyn Plumber
- Bronx Plumber
- Queens Plumber
- Staten Island Plumber
- Westchester Plumber
- Plumbing Contractor
- Emergency Plumber New York
- Leak Detection
- Bathroom Plumbing
- Toilet Leak
- Leaking Faucets
- Sewer Backflow
- Pipe Locating Services
- Oil & Gas Heating
- Kitchen Plumbing
- Garbage Disposal Installation
- Plumbing Quotes
- Plumbing Estimates
- Rooter Services
- Plumbing Maintenance
- Plumbing Remodeling